These ports are for connecting the receiver to various models and flight controllers
PPM signal port: Outputs standard PPM signal.
I-BUS/S.BUS signal port: Outputs i-BUS/S.BUS signal, up to 18 channels.
1.For information on putting the transmitter into bind mode please refer to the transmitters user manual.
2.Power on the receiver while holding the bind button. If the receiver’s LED is flashing this means it has entered bind mode.
If binding is successful the receiver’s LED will begin to flash slower.
3.On the transmitter, manually exit the binding menu. Once you have exited the bind menu the receiver’s LED will stop flashing and remain solid.
4.Check to make sure the model and receiver work as expected. If anything does not work as correctly, restart this procedure from the beginning.
Change i-BUS/S.BUS mode
When turned on and bound, the transmitter and receiver can change output mode to i-BUS and S.BUS modes by pressing and holding the bind button for 2 seconds.
LED turns off for 1 second then flashes twice: i-BUS output mode active.
LED flashes twice then turns off for 1 second: S.BUS output mode active.
1* FS A8S Receiver