✔Exclusive Mini fanless heat sink features halogen bulb design, which solve the problem of hard-to-fit areas that many typical H11 LED headlight or H8 H9 fog light heat dissipation method has and conform to a wide range of reflector or projector headlight/fog light housings, passing 95% automotive, car, vehicle, and motorcycle installation, providing cooler operating system and longer life span.
✔Halogen bulb design, no wire, just Plug-N-Play, all H11 bulbs are NOT CANBUS-Ready. For some cars, such as the 2007+ Dodge, Chrysler, Jeep, GMC, BMW, Mercedes-Bens requires the decoder (warning canceller) to be installed together to avoid the flicker or error code warning message.
✔Fit: H11, H11LL, H11ST, H11SU, H11XV, H9, H8, H8LL, H16 Type 2, aftermarket LED Headlight bulbs, perfect replacement for Halogen Lights. Apply to Low Beam or High Beam headlamp, Fog light, Daytime Running Light (DRL), driving light lamp etc.
✔H11 LED headlight bulbs are polarity sensitive, if your bulb couldn’t light up, please flip the plug and try again. One year warranty and professional customer service are guaranteed. Feel free to contact us directly if any questions.
1. 100% Brand New / Never Used
2. Intelligent temperature control, built-in lamp temperature overheat protection
3. Small size, easy to install
4. High quality aluminum heat dissipation guarantees a safe temperature range
5. Power consumption is lower than halogen bulbs, saving energy
6. Low voltage protection, high precision constant current drive chip
7. Voltage: DC 9-18V
8. IP Rate: IP68
9. LED type: COB LEDs
10. Beam Angle: 360°
11. Color Temperature: 6000K-6500K White
12. Heat Dissipation Theory: Heat Pipe Technology + Aluminum Heatsink
13. Operating Life: >50000hrs
14. Operating Temperature: -40 – +80°Cd
15. For:Fog light, Daytime Running Light (DRL), driving light lamp etc.
2 x LED Headlights Bulbs
5 Years Warranty
Automotive LED headlamps advantages:
1. LED lights than traditional halogen energy, more power.
2. Xenon lamp brightness and proximity , but the LED lights light up without delay, to enhance road safety. Instant start no strong currents impact , effectively protecting the car comes with a battery , improving battery life of more than 30%.
3. Fast cooling , the appearance of the most advanced design , thermal structure ingenious and reasonable.Less warranty, power driver with wide voltage constant current mode , the car can respond to a variety of voltage instability , the effective protection of normal use Led efficient and simple structure . Fewer Components damaged, repair the probability is very low , compared with HID ballast repair lower than 80% .
4. Heating temperature is low , protect the car . Xenon working temperature up to 800 ° -1000 ° , the main reason for the car ignition .
5. LED car headlights simple structure, fewer parts than xenon lamps, significantly lower than the xenon lamp failure rates !
6. Automotive LED headlamps color temperature balancing. The Xenon bulbs in the same color to clear , about 6000K.
1. As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process.
2. Put the vehicle into park or make sure it is securely in gear.
3. Make sure to have the ignition turned off and the keys removed.
4. Be careful to avoid burns, especially when turning on or off the vehicles lighting.
5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.
6. Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.
7. Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulb.